Flush Door
Sangam Plus Plywood is a well-known Flush Door Manufacturers. These flush doors are manufactured from hand-picked hardwood wood with preservative-treated and well seasoned. Due to standing more durable and highly dimensionally durable, our products are used for interior as well as exterior application purposes. Not only flush doors are structurally robust but they act as good insulators against warmth and sound.
Features of Flush Door
- • Chemically feted and vacuum pressed to create them both heat and water-resistant.
- • Dimensionally precise and long-lasting, minimizing possibilities of gaps, warps and wrenches even in intense climate situations.
- • Superbly stable with a high screw bearing capacity.
- • Specially strengthened lock area (“lock block”) on both sides for maximum safety.
Standard Thickness : 25mm, 30mm, 32mm, 35mm upto 50mm
Length ,Width: Customise
| TEST | ISI REQUIREMENT |
OBSERVED VALUE |
|---|---|---|
| Dimension | Length,Width + 5mm Thickness + 1mm | Within Limits |
| General Flatness | Twist, Cupping, Warping Not To Exceed 6mm | |
| Local Planeness | Depth of deviation at any point to be less than 0.5 mm | Within limits |
| Impact Indentation Test | Depth of Indentation not to exceed 0.2 mm | Within limits |
| Buckling Test | Initial deflection - 50 mm residual deflection - 5 mm | Within limits |
| Slamming Test | No visible damage after Test | No visible damage |
| Varying Humidity Test | No visible warping, twisting or de-lamination | No such defects observed |
| Knife Test | Minimum Pass Standard | Excellent |
| Glue Adhesion Test | No de-lamination | No de-lamination |